sábado, 30 de abril de 2011

Corrosion of Polymers and Elastomers (Corrosion Engineering Handbook, Second Edition)

Corrosion of Polymers and Elastomers (Corrosion Engineering Handbook, Second Edition)

by: Philip A. Schweitzer P.E.

Corrosion of Polymers and Elastomers (Corrosion Engineering Handbook, Second Edition)  library.nu #402893

md5: 64852bd849402d42f6a98da2025a65f6
size: 1.76 MB [ 1843884 bytes ]
type: .pdf
status: normal
language: en [ english ]
submitted by: anonymous


metadata: ( ? )

year: 2006
pages: 591
bookmarked: yes
paginated: yes
vector: yes
cover: yes
searchable: yes
series: Corrosion Engineering Handbook
edition: 2nd
incomplete: index is missing

description: ( ? )

Corrosion of Polymers and Elastomers provides a detailed examination of the corrosive effects of thermoplastic polymers, thermoset polymers, and elastomeric materials. The book is perfectly suited for specialists interested in the corrosion resistance and mechanisms of these materials. Following a general introduction to the composition, properties, and applications of polymers, the book focuses on the effects of chemical corrosion caused by changes in temperature, moisture, and other corrodents. Organized by material type, the chapters cover each material's ability to withstand sun, weather, and ozone as well as its chemical resistance and typical applications. The book also includes compatibility tables for each of the materials and compares the corrosion resistance of selected elastomers.

Table of Contents
Introduction to Polymers Additives Permeation Absorption Painting of Polymers Corrosion of Polymers
Thermoplastic Polymers Joining of Thermoplastics Acrylonitrile-Butadiene-Styrene (ABS)
Acrylics Chlotrifluoroethylene (CTFE)
Ethylenechlorotrifluoroethylene (ECTFE)
Ethylene Tetrafluoroethylene (ETFE)
Fluorinated Ethylene-Propylene (FEP)
Polyamides (PA)
Polyamide-Imide (PAI)
Polybutylene (PB)
Polycarbonate (PC)
Polyetheretherketone (PEEK)
Polyether-Imide (PEI)
Polyether Sulfone (PES)
Perfluoralkoxy (PFA)
Polytetrafluoroethylene (PTFE)
Polyvinylidene Fluoride (PVDF)
Polyethylene (PE)
Polyethylene Terephthalate (PET)
Polyimide (PI)
Polyphenylene Oxide (PPO)
Polyphenylene Sulfide (PPS)
Polypropylene (PP)
Styrene-Acrylonitrile (SAN)
Polyvinylidene Chloride (PVDC)
Polysulfone (PSF)
Polyvinyl Chloride (PVC)
Chlorinated Polyvinyl Chloride (CPVC)
Chlorinated Polyether (CPE)
Polyacrylonitrile (PAN)
Polyurethane (PUR)
Polybutylene Terephthalate (PBT)
Thermoset Polymers Corrosion of Thermosets Joining of Thermosets Ultraviolet Light Stability Reinforcing Materials Polyesters
3.6 Epoxy Polyesters Vinyl Esters Furans Phenolics Phenol-Formaldehyde Silicones Siloxirane Polyurethanes Melamines Alkyds Ureas (Aminos)
Allyls Polybutadienes Polyimides Cyanate Esters
Comparative Corrosion Resistance of Thermoplastic and Thermoset Polymers
Elastomers Introduction Natural Rubber Isoprene Rubber (IR)
Neoprene (CR)
Styrene-Butadiene Rubber (SBR, Buna-S, GR-S)
Nitrile Rubber (NBR, Buna-N)
Butyl Rubber (IIR) and Chlorobutyl Rubber (CIIR)
Chlorosulfonated Polyethylene Rubber (Hypalon)
Polybutadiene Rubber (BR)
Ethylene-Acrylic (EA) Rubber Acrylate-Butadiene Rubber (ABR) and Acrylic Ester-Acrylic Halide (ACM) Rubbers Ethylene-Propylene Rubbers (EPDM and EPT)
Styrene-Butadiene-Styrene (SBS) Rubber Styrene-Ethylene-Butylene-Styrene (SEBS) Rubber Polysulfide Rubbers (ST and FA)
Urethane Rubbers (AU)
Polyamides Polyester (PE) Elastomer Thermoplastic Elastomers (TPE) Olefinic Type (TEO)
Silicone (SI) and Fluorosilicone (FSI) Rubbers Vinylidene Fluoride (HFP, PVDF)
Fluoroelastomers (FKM)
Ethylene-Tetrafluoroethylene (ETFE) Elastomer Ethylene-Chlorotrifluoroethylene (ECTFE) Elastomer Perfluoroelastomers (FPM)
Epichlorohydrin Rubber Ethylene-Vinylacetate Copolymer (EVM)
Chlorinated Polyethylene (CM)
Comparative Corrosion Resistance of Selected Elastomers
*Most chapters contain Reference sections

Nenhum comentário:

Postar um comentário